Home / News / Industry Encyclopedia / How to make a roof ladder hook in 4 simple steps?

Product Category

How to make a roof ladder hook in 4 simple steps?

Views: 120     Author: Site Editor     Publish Time: 2022-04-15      Origin: Site

Inquire

If you are the homeowner, it is normal for you to climb up the roof to repair the occasional cracks and other things that need to be repaired. When other people spend money to ask professionals to do the work for them, you may be the one who likes to do the work yourself. So, you will use a ladder to do this.


But what if the ladder falls and you are trying to repair something? This can be avoided by adding a hook to the roof ladder. We will show you how to make a roof ladder hook in 4 steps.


How to make a roof ladder hook?


We have compiled four simple steps that you can use to easily build your own roof ladder hook. They have all the information we think you need. So, follow it correctly, and you will soon need a roof ladder hook. Here they are:


Step 1: Take the measurement correctly


First, you need to make sure that all measurements are correct. Because otherwise, your hook will not work as expected. Therefore, take appropriate measures for roofs and platforms.


Then add another 4 inches to that length. Now, prepare two pieces of wood with this measurement value as the guide rail length. Then put the length of the rail on the saw while placing it on the edge and place them side by side. Now, clip them together.


Step 2: Determine the layout marks of the rungs of the ladder


Next, you need to determine the layout marks of the rungs of the ladder. You can start at any end of the rail length you are using. Now, as you move further, layout takes place every 12 inches. In this case, you can use the square of the builder to maintain 12-inch accuracy.

ladder

Step 3: Start to cut


Complete all markings and confirmations. We need to start cutting the parts we will use. First set the blade of the circular saw to the thickness of 1 x 4 inch wood. Then use a saw to make a crosscut on your track.


Now, try to use a hammer and chisel to cut the wider part. Cut off 3.5 inches and use a chisel in the middle. The groove needs to be ¾ inches. This should provide you with 16-inch rails that can be used as ladder rungs.


Step 4: Assemble the whole thing to get the job done


Finally, you need to assemble everything together. First connect the rung to the rail. Place the rails with a 16-inch gap between them and keep the grooves up. Then put the ladder rungs into the grooves. Then drill some wood screws to fix them.


Now, finally, cushion the hook with a material that will not damage the roof tiles, and you should be very happy.


That's all we have about how to make a roof ladder hook, and we hope this will help. You can now get all this information and make the most of it. Now, when you try to make your own roof ladder hook, make sure you have protective gear. In addition, if you have not done this before, please seek professional help.

HOW TO FIND US

SEND YOUR INQUIRY TO US NOW , LET’S WE OFFER YOU NICE PRICE AND GOOD SERVICE NOW. 

Yongkang Sunway Industry&Trade Co.,Ltd. Was founded in 2012, has been specializing in producing multi-purpose aluminium ladders, household ladders, extension ladders, working platforms and scaffold ladder. With more than 9 years’ manufacturing experiences, advanced equipment as well as machinery, and over 200 skillful workers, We mainly produce Aluminum ladder and Steel Ladder two series ladders.
No.10 Qilong Road,Xishan Industry Area,Xixi Town,Yongkang,China
Tel: +86-13566756164
Fax: +86 0579-81717597
NAVIGATION
ABOUT US
FOLLOW US
PRODUCTS
STORE INFORMATION
Copyright 2021©Yongkang Sunway Industry&Trade Co.,Ltd                   Privacy Policy